İmplant Üstü Protezlerde Kişiye Özel (Custom) Dayanaklar
Özet
Cerrahi işlem kadar doğru protetik uygulama da dental implant uygulamalarında başarıyı belirler. İmplantların protetik üst yapıları değişik yöntemlerle elde edilebilmektedir. İmplant destekli protetik restorasyonlar hazırlanırken implantların konumunun yapılacak olan protetik tedaviyi estetik ve fonksiyonel olarak engellemesi durumlarında kişiye özel dayanaklar kullanılabilmektedir. Kişiye özel olarak hazırlanan dayanakların fonksiyon ve estetik açıdan prefabrike olanlara göre birçok avantajının bulunduğu belirtilmiştir. Bu çalışmada kişiye özel olarak hazırlanan dayanakların kullanım alanları, avantajları, dezavantajları ve hazırlanan materyaller hakkında bilgi verilmiştir.
Referanslar
Misch CE. Dental implant prostheticts 1st edition. 2005:p. 32-41.
Binon PP. Implants and components: entering the new millenium. Int J Oral Maxillofac Im- plants. 2000;15(1):76-94.
Kohal RJ, Att W, Bächle M, Butz F. 2008. Ceramic Abutments And Ceramic Oral İmplants. An Update. Periodontology. 2000;47:224-243.
Priest G. Virtual-designed and Computer-milled Implant Abutments, J Oral Maxillo Fac Surg. 2005: 63:22-32.
Grosmann Y, Pascıuta M. and Fınger I.M. A novel technique using a coded healing abutment for the fabrication of a CAD/CAM titanium abutment for an implant-supported restoration, J Prosthet Dent. 2006; 95(3), 258-61.
Fischer H, Yildirim M, Schmitz F, Marx R. Reduced strength of zirconia abutments as a result of cutting. Dtsch Zahnarztl Z 1999;7:443-5.
Nakamura K, Kanno T, Milleding P, Ortengren U. Zirconia as a dental implant abutment material: a systematic review. Int J Prosthodont 2010;23(4):299-309.
Joda T, Wittneben JG, Brägger U. Digital implant impressions with the "Individualized Scanbody Technique" for emergence profile support. Clin Oral Implants Res 2014;25(3): 395-7.
Henriksson K, Jemt T. Evaluation of custommade procera ceramic abutments for single implant tooth replacement: a prospective 1-year follow-up study. Int J Prosthodont 2003;16(6):626-30.
Holst S, Blatz MB, Hegenbarth E, Wichmann M, Eitner S. Prosthodontic considerations for predictable single-implant esthetics in the anterior maxilla. J Oral Maxillofac Surg 2005;63(9 Suppl 2):89-96.
Terzioğlu H, Öztürk B. İmplant-Abutment Özelliklerinin Tedavinin Başarısındaki Etkisi, Turkiye Klinikleri J Prosthodont-Special Topics. 2015; s:23-29.
Zarauz C, Pitta J, Pradies G, Sailer I. Clinical recommendations for implant abutment selection for single-implant reconstructions: customized vs standardized ceramic and metallic solutions. The International journal of periodontics & restorative dentistry. 2020;40:31-37.
Lewis S, Beumer J, Hornburg W, & Moy P..The “UCLA” abutment. Int J Oral and Maxillofacial Implants. 1988;3:183-189.
Svoboda E.L.A. The Evolution from Stock to Custom Abutments Allows for a Better Prosthesis Design that can Control the Gingival Effects and thus the flow of Excess Cement. Published to www.ReverseMargin.com. 2015.
Silveira CD, Jr Fernandes, Neto AJ, Neves FD, Franco SD, Mendonca G. Laboratory procedures influence in the implant/UCLA abutment fit – pilot study. Brazilian Dental Journal. 2002; 4:392–400
Barbosa GAS, Simamoto Júnior PC, Fernandes Neto AJ, de Mattos M da GC, das Neves FD. Prosthetic laboratory influence on the vertical misfit at the implant/UCLA abutment interface. Braz Dent J. 2007;18(2):139–43.
Fuster Torres M, Albalat Estela S, Alcañiz Raya M, Peñarrocha Diago M. CAD/CAM dental systems in implant dentistry: update. 2009.
Shafie HR, editor. Clinical and Laboratory Manual of Dental Implant Abutments, First Edition. John Wiley & Sons Inc; 2014. pp. 17-20.
Zarone, F., Russo, S., Sorrentino, R., From Porcelain-to-Metal to Zircona: Clinical and Experimental Considerations. Dent Mater. 27: 83-96, 2011.
Henriksson K, Jemt T. Evaluation of custommade procera ceramic abutments for singleimplant tooth replacement: a prospective 1-year follow-up study. Int J Prosthodont. 2003; 16: 626- 630.
Boudrias P, Shoghikian E, Morin E, Hutnik P. Esthetic option for the implant-supported singletooth restoration - treatment sequence with a ceramic abutmant. J Can Dent Assoc. 2001; 67: 508-514.
Butz F, Heydecke G, Okutan M, Strub J. Survival rate, fracture strength and failure mode of ceramic implant abutments after chewing simulation. J Oral Rehabil. 2005;32(11):838-843.
Hibrit Dayanaklar/Hibrit Dayanak Kronlar Selcuk Dent J. 2022; 9: 641-651 (Doi: 10.15311/selcukdentj.1064442)
Gehrke P, Johannson D, Fischer C, Stawarczyk B, Beuer F. In vitro fatigue and fracture resistance of one- and two-piece CAD/CAM zirconia implant abutments. Int J Oral Maxillo Fac Implants. 2015;30(3):546-554.
Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res. 2013; 57(4): 236-61..
Magne P, Stanley K, Schlichting LH. Modeling of ultrathin occlusal veneers. Dent Mater. 2012; 28 (7):772-82.
Elsayed A, Wille S, Al-Akhali M, Kern M, Habil MD. Comparison of fracture strength and failure mode of different ceramic implant abutments. J Prosthet Dent. 2017; 117(4): 499-506.
Roberts EE, Bailey CW, Ashcraft-Olmscheid DL, Vandevalle KS. Fracture resistance of titanium-based lithium disilicate and zirconia implant restorations. J Prosthodont. 2018; 27(7): 644-50.a
Springall GAC, Yin L. Response of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic to cyclic nanoindentation. J Mech Behav Biomed Mater. 2019;92: 58-70.
Reich S. Tooth-colored CAD/CAM monolithic restorations. Int J Comput Dent. 2015;18(2):131-46.
Binon PP. Implants and components: entering the new millenium. Int J Oral Maxillofac Im- plants. 2000;15(1):76-94.
Kohal RJ, Att W, Bächle M, Butz F. 2008. Ceramic Abutments And Ceramic Oral İmplants. An Update. Periodontology. 2000;47:224-243.
Priest G. Virtual-designed and Computer-milled Implant Abutments, J Oral Maxillo Fac Surg. 2005: 63:22-32.
Grosmann Y, Pascıuta M. and Fınger I.M. A novel technique using a coded healing abutment for the fabrication of a CAD/CAM titanium abutment for an implant-supported restoration, J Prosthet Dent. 2006; 95(3), 258-61.
Fischer H, Yildirim M, Schmitz F, Marx R. Reduced strength of zirconia abutments as a result of cutting. Dtsch Zahnarztl Z 1999;7:443-5.
Nakamura K, Kanno T, Milleding P, Ortengren U. Zirconia as a dental implant abutment material: a systematic review. Int J Prosthodont 2010;23(4):299-309.
Joda T, Wittneben JG, Brägger U. Digital implant impressions with the "Individualized Scanbody Technique" for emergence profile support. Clin Oral Implants Res 2014;25(3): 395-7.
Henriksson K, Jemt T. Evaluation of custommade procera ceramic abutments for single implant tooth replacement: a prospective 1-year follow-up study. Int J Prosthodont 2003;16(6):626-30.
Holst S, Blatz MB, Hegenbarth E, Wichmann M, Eitner S. Prosthodontic considerations for predictable single-implant esthetics in the anterior maxilla. J Oral Maxillofac Surg 2005;63(9 Suppl 2):89-96.
Terzioğlu H, Öztürk B. İmplant-Abutment Özelliklerinin Tedavinin Başarısındaki Etkisi, Turkiye Klinikleri J Prosthodont-Special Topics. 2015; s:23-29.
Zarauz C, Pitta J, Pradies G, Sailer I. Clinical recommendations for implant abutment selection for single-implant reconstructions: customized vs standardized ceramic and metallic solutions. The International journal of periodontics & restorative dentistry. 2020;40:31-37.
Lewis S, Beumer J, Hornburg W, & Moy P..The “UCLA” abutment. Int J Oral and Maxillofacial Implants. 1988;3:183-189.
Svoboda E.L.A. The Evolution from Stock to Custom Abutments Allows for a Better Prosthesis Design that can Control the Gingival Effects and thus the flow of Excess Cement. Published to www.ReverseMargin.com. 2015.
Silveira CD, Jr Fernandes, Neto AJ, Neves FD, Franco SD, Mendonca G. Laboratory procedures influence in the implant/UCLA abutment fit – pilot study. Brazilian Dental Journal. 2002; 4:392–400
Barbosa GAS, Simamoto Júnior PC, Fernandes Neto AJ, de Mattos M da GC, das Neves FD. Prosthetic laboratory influence on the vertical misfit at the implant/UCLA abutment interface. Braz Dent J. 2007;18(2):139–43.
Fuster Torres M, Albalat Estela S, Alcañiz Raya M, Peñarrocha Diago M. CAD/CAM dental systems in implant dentistry: update. 2009.
Shafie HR, editor. Clinical and Laboratory Manual of Dental Implant Abutments, First Edition. John Wiley & Sons Inc; 2014. pp. 17-20.
Zarone, F., Russo, S., Sorrentino, R., From Porcelain-to-Metal to Zircona: Clinical and Experimental Considerations. Dent Mater. 27: 83-96, 2011.
Henriksson K, Jemt T. Evaluation of custommade procera ceramic abutments for singleimplant tooth replacement: a prospective 1-year follow-up study. Int J Prosthodont. 2003; 16: 626- 630.
Boudrias P, Shoghikian E, Morin E, Hutnik P. Esthetic option for the implant-supported singletooth restoration - treatment sequence with a ceramic abutmant. J Can Dent Assoc. 2001; 67: 508-514.
Butz F, Heydecke G, Okutan M, Strub J. Survival rate, fracture strength and failure mode of ceramic implant abutments after chewing simulation. J Oral Rehabil. 2005;32(11):838-843.
Hibrit Dayanaklar/Hibrit Dayanak Kronlar Selcuk Dent J. 2022; 9: 641-651 (Doi: 10.15311/selcukdentj.1064442)
Gehrke P, Johannson D, Fischer C, Stawarczyk B, Beuer F. In vitro fatigue and fracture resistance of one- and two-piece CAD/CAM zirconia implant abutments. Int J Oral Maxillo Fac Implants. 2015;30(3):546-554.
Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res. 2013; 57(4): 236-61..
Magne P, Stanley K, Schlichting LH. Modeling of ultrathin occlusal veneers. Dent Mater. 2012; 28 (7):772-82.
Elsayed A, Wille S, Al-Akhali M, Kern M, Habil MD. Comparison of fracture strength and failure mode of different ceramic implant abutments. J Prosthet Dent. 2017; 117(4): 499-506.
Roberts EE, Bailey CW, Ashcraft-Olmscheid DL, Vandevalle KS. Fracture resistance of titanium-based lithium disilicate and zirconia implant restorations. J Prosthodont. 2018; 27(7): 644-50.a
Springall GAC, Yin L. Response of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic to cyclic nanoindentation. J Mech Behav Biomed Mater. 2019;92: 58-70.
Reich S. Tooth-colored CAD/CAM monolithic restorations. Int J Comput Dent. 2015;18(2):131-46.
Sayfalar
65-72
Gelecek
21 Kasım 2024
Telif Hakkı (c) 2024 Akademisyen Yayınevi Kitap DOI Portalı
