Diş Hekimliğinde Cad-Cam ile Üretilen Dijital Tam Protezler ve Üretiminde Kullanılan Sistemler
Özet
Diş hekimliğinde dişsiz hastalar için tercih edilen tam protezler, günümüzde sıklıkla kullanılan ve gelecek dönemde de sıklıkla kullanıma devam edecek protezlerdir. Geleneksel tam protezlerin bazı dezavantajları ve dijital çağın gelişimi nedeniyle tam protezlerde artık dijital olarak tasarlanıp üretimleri yapılmaktadır. Dijital tam protezlerin üretilmesinde çeşitli sistemler bulunmakta olup bu sistemlerin birbirinden ayrılan özellikleri mevcuttur. Sistemler dijital tam protez üretimi için eklemeli ve eksiltmeli üretim teknikleri kullanmaktadırlar. Bahsedilen sistemler seans sayısını azaltmakta ve hasta konforunu arttırmaktadır. Bu kitap bölümünün amacı dijital tam protez üretimi için kullanılan sistemlerin hakkında bilgi sağlamaktır.
Complete dentures, which are preferred for edentulous patients in dentistry, are prostheses that are frequently used today and will continue to be used frequently in the future. Due to some disadvantages of traditional complete dentures and the development of the digital age, complete dentures are now designed and manufactured digitally. There are various systems for the production of digital complete dentures and these systems have distinctive features. The systems use additive and subtractive manufacturing techniques for the production of digital complete dentures. These systems reduce the number of sessions and increase patient comfort. The aim of this book chapter is to provide information about the systems used for the production of digital complete dentures.
Referanslar
Villias A, Karkazis H, Yannikakis S, Theocharopoulos A, Sykaras N, Polyzois G. Current status of digital complete dentures technology. Prosthesis. 2021;3(3):229-44.
EĞİLMEZ F. Tam Dişsizliklerde İmplant Destekli Protez Yapımı İçin Hasta Unsuru Endikasyon Ve Kontrendikasyonlar. Turkiye Klinikleri J Prosthodont-Special Topics. 2016;2(1).
Cunha T, Della Vecchia M, Regis R, Ribeiro A, Muglia VA, Mestriner Jr W, et al. A randomised trial on simplified and conventional methods for complete denture fabrication: masticatory performance and ability. Journal of dentistry. 2013;41(2):133-42.
Han W, Li Y, Zhang Y, Zhang Y, Hu P, Liu H, et al. Design and fabrication of complete dentures using CAD/CAM technology. Medicine. 2017;96(1).
Goodacre CJ, Goodacre BJ, Baba NZ. Should digital complete dentures be part of a contemporary prosthodontic education? Journal of Prosthodontics. 2021;30(S2):163-9.
Maragliano‐Muniz P, Kukucka ED. Incorporating digital dentures into clinical practice: flexible workflows and improved clinical outcomes. Journal of Prosthodontics. 2021;30(S2):125-32.
Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. international Journal of Prosthodontics. 1994;7(1).
Kawahata N, Ono H, Nishi Y, Hamano T, Nagaoka E. Trial of duplication procedure for complete dentures by CAD/CAM. Journal of oral rehabilitation. 1997;24(7):540-8.
Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. The Journal of prosthetic dentistry. 2013;109(6):361-6.
Marinello CP, Brugger R. Digital Removable Complete Denture—An Overview. Current Oral Health Reports. 2021:1-15.
Abd El Galil EG, Mohamed SL, Rizk FN, Sabet ME. Evaluation of two computer-aided design software on the adaptation of digitally constructed maxillary complete denture. The Journal of the Indian Prosthodontic Society. 2021;21(4):383.
Kale E, Özçelik TB. Türk diş hekimliği fakültelerinde CAD/CAM üzerine eğitimin değerlendirilmesi. 2018.
YÜZBAŞIOĞLU E, US YÖ, ÖZDEMİR G, ALBAYRAK B. Clinical outcomes and Complications of CAD-CAM Fabricated Complete Dentures; An update and review. Journal of Experimental and Clinical Medicine. 2021;38(3s):92-7.
Srinivasan M, Schimmel M, Naharro M, O’Neill C, McKenna G, Müller F. CAD/CAM milled removable complete dentures: time and cost estimation study. Journal of dentistry. 2019;80:75-9.
Bilgin MS, Baytaroğlu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. European journal of dentistry. 2016;10(02):286-91.
Steinmassl P-A, Wiedemair V, Huck C, Klaunzer F, Steinmassl O, Grunert I, et al. Do CAD/CAM dentures really release less monomer than conventional dentures? Clinical oral investigations. 2017;21:1697-705.
Al-Fouzan AF, Al-Mejrad LA, Albarrag AM. Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures. The journal of advanced prosthodontics. 2017;9(5):402-8.
Alp G, Johnston WM, Yilmaz B. Optical properties and surface roughness of prepolymerized poly (methyl methacrylate) denture base materials. The Journal of prosthetic dentistry. 2019;121(2):347-52.
Baba NZ, Goodacre BJ, Goodacre CJ, Müller F, Wagner S. CAD/CAM complete denture systems and physical properties: A review of the literature. Journal of Prosthodontics. 2021;30(S2):113-24.
Lima JMC, Anami LC, Araujo RM, Pavanelli CA. Removable partial dentures: use of rapid prototyping. Journal of Prosthodontics. 2014;23(7):588-91.
Susic I, Travar M, Susic M, editors. The application of CAD/CAM technology in Dentistry. IOP Conference Series: Materials Science and Engineering; 2017: IOP Publishing.
Sun J, Zhang FQ. The application of rapid prototyping in prosthodontics. Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry. 2012;21(8):641-4.
Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: a review of the available streams. International journal of dentistry. 2014;2014.
Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. British dental journal. 2008;204(9):505-11.
Kalberer N, Mehl A, Schimmel M, Müller F, Srinivasan M. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness. The Journal of prosthetic dentistry. 2019;121(4):637-43.
Baba NZ, AlRumaih HS, Goodacre BJ, Goodacre CJ. Current techniques in CAD/CAM denture fabrication. General dentistry. 2016;64(6):23-8.
Kanakaraj S, Kumar H, Ravichandran R. An update on CAD/CAM removable complete dentures: A review on different techniques and available CAD/CAM denture systems. International Journal of Applied Dental Sciences. 2021;7(1):491-8.
Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with CAD/CAM technology. The Journal of prosthetic dentistry. 2014;111(5):351-5.
Baba NZ. Materials and processes for CAD/CAM complete denture fabrication. Current Oral Health Reports. 2016;3:203-8.
DENTCA INC. 2016 [Available from: https://dentca.com/blog/home/company.
Steinmassl P-A, Klaunzer F, Steinmassl O, Dumfahrt H, Grunert I. Evaluation of Currently Available CAD/CAM Denture Systems. International Journal of Prosthodontics. 2017;30(2).
How to do dentures digitally - The Reference Denture Protocol [Available from: https://www.3shape.com/en/ebooks.
How to do dentures digitally A step-by-step guide to intraoral scanning edentulous patients and designing and manufacturing dentures [Available from: https://www.3shape.com/en/ebooks.
Fang J-H, An X, Jeong S-M, Choi B-H. Digital intraoral scanning technique for edentulous jaws. The Journal of prosthetic dentistry. 2018;119(5):733-5.
EĞİLMEZ F. Tam Dişsizliklerde İmplant Destekli Protez Yapımı İçin Hasta Unsuru Endikasyon Ve Kontrendikasyonlar. Turkiye Klinikleri J Prosthodont-Special Topics. 2016;2(1).
Cunha T, Della Vecchia M, Regis R, Ribeiro A, Muglia VA, Mestriner Jr W, et al. A randomised trial on simplified and conventional methods for complete denture fabrication: masticatory performance and ability. Journal of dentistry. 2013;41(2):133-42.
Han W, Li Y, Zhang Y, Zhang Y, Hu P, Liu H, et al. Design and fabrication of complete dentures using CAD/CAM technology. Medicine. 2017;96(1).
Goodacre CJ, Goodacre BJ, Baba NZ. Should digital complete dentures be part of a contemporary prosthodontic education? Journal of Prosthodontics. 2021;30(S2):163-9.
Maragliano‐Muniz P, Kukucka ED. Incorporating digital dentures into clinical practice: flexible workflows and improved clinical outcomes. Journal of Prosthodontics. 2021;30(S2):125-32.
Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. international Journal of Prosthodontics. 1994;7(1).
Kawahata N, Ono H, Nishi Y, Hamano T, Nagaoka E. Trial of duplication procedure for complete dentures by CAD/CAM. Journal of oral rehabilitation. 1997;24(7):540-8.
Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. The Journal of prosthetic dentistry. 2013;109(6):361-6.
Marinello CP, Brugger R. Digital Removable Complete Denture—An Overview. Current Oral Health Reports. 2021:1-15.
Abd El Galil EG, Mohamed SL, Rizk FN, Sabet ME. Evaluation of two computer-aided design software on the adaptation of digitally constructed maxillary complete denture. The Journal of the Indian Prosthodontic Society. 2021;21(4):383.
Kale E, Özçelik TB. Türk diş hekimliği fakültelerinde CAD/CAM üzerine eğitimin değerlendirilmesi. 2018.
YÜZBAŞIOĞLU E, US YÖ, ÖZDEMİR G, ALBAYRAK B. Clinical outcomes and Complications of CAD-CAM Fabricated Complete Dentures; An update and review. Journal of Experimental and Clinical Medicine. 2021;38(3s):92-7.
Srinivasan M, Schimmel M, Naharro M, O’Neill C, McKenna G, Müller F. CAD/CAM milled removable complete dentures: time and cost estimation study. Journal of dentistry. 2019;80:75-9.
Bilgin MS, Baytaroğlu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. European journal of dentistry. 2016;10(02):286-91.
Steinmassl P-A, Wiedemair V, Huck C, Klaunzer F, Steinmassl O, Grunert I, et al. Do CAD/CAM dentures really release less monomer than conventional dentures? Clinical oral investigations. 2017;21:1697-705.
Al-Fouzan AF, Al-Mejrad LA, Albarrag AM. Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures. The journal of advanced prosthodontics. 2017;9(5):402-8.
Alp G, Johnston WM, Yilmaz B. Optical properties and surface roughness of prepolymerized poly (methyl methacrylate) denture base materials. The Journal of prosthetic dentistry. 2019;121(2):347-52.
Baba NZ, Goodacre BJ, Goodacre CJ, Müller F, Wagner S. CAD/CAM complete denture systems and physical properties: A review of the literature. Journal of Prosthodontics. 2021;30(S2):113-24.
Lima JMC, Anami LC, Araujo RM, Pavanelli CA. Removable partial dentures: use of rapid prototyping. Journal of Prosthodontics. 2014;23(7):588-91.
Susic I, Travar M, Susic M, editors. The application of CAD/CAM technology in Dentistry. IOP Conference Series: Materials Science and Engineering; 2017: IOP Publishing.
Sun J, Zhang FQ. The application of rapid prototyping in prosthodontics. Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry. 2012;21(8):641-4.
Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: a review of the available streams. International journal of dentistry. 2014;2014.
Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. British dental journal. 2008;204(9):505-11.
Kalberer N, Mehl A, Schimmel M, Müller F, Srinivasan M. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness. The Journal of prosthetic dentistry. 2019;121(4):637-43.
Baba NZ, AlRumaih HS, Goodacre BJ, Goodacre CJ. Current techniques in CAD/CAM denture fabrication. General dentistry. 2016;64(6):23-8.
Kanakaraj S, Kumar H, Ravichandran R. An update on CAD/CAM removable complete dentures: A review on different techniques and available CAD/CAM denture systems. International Journal of Applied Dental Sciences. 2021;7(1):491-8.
Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with CAD/CAM technology. The Journal of prosthetic dentistry. 2014;111(5):351-5.
Baba NZ. Materials and processes for CAD/CAM complete denture fabrication. Current Oral Health Reports. 2016;3:203-8.
DENTCA INC. 2016 [Available from: https://dentca.com/blog/home/company.
Steinmassl P-A, Klaunzer F, Steinmassl O, Dumfahrt H, Grunert I. Evaluation of Currently Available CAD/CAM Denture Systems. International Journal of Prosthodontics. 2017;30(2).
How to do dentures digitally - The Reference Denture Protocol [Available from: https://www.3shape.com/en/ebooks.
How to do dentures digitally A step-by-step guide to intraoral scanning edentulous patients and designing and manufacturing dentures [Available from: https://www.3shape.com/en/ebooks.
Fang J-H, An X, Jeong S-M, Choi B-H. Digital intraoral scanning technique for edentulous jaws. The Journal of prosthetic dentistry. 2018;119(5):733-5.
Sayfalar
33-42
Gelecek
30 Nisan 2024
Telif Hakkı (c) 2024 Akademisyen Yayınevi Kitap Portalı
Lisans
LisansNasıl Atıf Yapılır
1.
Kara A, Kızılkaya AR. Diş Hekimliğinde Cad-Cam ile Üretilen Dijital Tam Protezler ve Üretiminde Kullanılan Sistemler. Içinde: Kesim B, editör. Güncel Protetik Diş Tedavisi Çalışmaları VI (Bahar) [Internet]. Türkiye: Akademisyen Yayınevi Kitap DOI Portalı; 2024 [a.yer 13 Temmuz 2026]. ss. 33-42. Erişim adresi: https://www.omp35.books.akademisyen.net/index.php/akya/catalog/book/3057/chapter/13607
